Small Indoor Tabletop Dual Air Purifier High Ozone Output 76 X 63 X 83 MM

Specification details :

Ozone Function:

According to the internationally acknowledged ozone sterilization experiment data, when extending the time to 4 minutes, add 12.6 MG/L ozone, the killing rate of coronavirus is 100%. When extending the time to the 3 minutes, add 4 MG/L ozone, the killing rate of the HIV is 100%. When extending the time to the 20 minutes, add 10 MG/L ozone, the killing tate of the HBV-Ag is 99.9%. When extending the time to the 10 minutes, add 8 MG/L ozone, the killing rate of the mycoplasma, Chlamydia is 99.85%.

Negative ionic Function:

Negative ions are considered the “vitamin of the air”. Molecules usually carry a neutral charge; however, when molecules lose an electron, they become anions (negatively charged ions). Anions are relatively unstable, and will attract and trap any free electron pairs. As a result of this attraction, small air pollutants and dust molecules bind with anions, producing an air purifying effect.

The package:

There are five items in the box:

1. The EP202 unit
2. The mounting bracket with screws
3. 4×AA alkaline batteries
4. AC/DC adaptor or switching mode power adaptor
5. The instruction manual

Functions:

1. Remove Smoke, odors, pollen, dust, allergen,etc.
2. Kill bacteria, viruses, fungi, spores, mites, etc.
3. Increase the negative ions in the air, giving you a fresh breath like wolking in the woods or near a waterfall
4. Increase oxygen in the room, helping people with respiratory diseases.
5. Enhance the immune system
6. Increase work productivity and concentration.

Features:

How to install:

1. Push the battery cover downwards to open. Install four alkaline AA batteries into the battery compartment. (The terminal with a spring is the negative terminal.) Replace the battery cover.
2. For continual indoor use, use the power adaptor supplied:
a. Use the two screws provided to fit the mounting bracket onto the back of the unit
b. Insert the round shaped outlet of the power adaptor into the only socket at the back of the unit, and plug the other end to an appropriate electrical socket on the wall.
3. Place the unit at a convenient position so that the negative ions and ozone will be most effectively dispersed throughout the room.

Operation:

Gently press the ON/OFF button once to switch ON the unit, as will be indicated by the flashing neon LED and the feeling of static wind at the output holes at the top. Do not press the ON/OFF switch for too long as it may then turn the unit OFF. To turn it OFF, hold the button for about 2 seconds.
A set of batteries should provide 5 hours of use. When the speed of the flashing neon becomes very slow, the batteries should be replaced.
Due to the fact that ozone is about 1.7 time heavier than air, it is recommended to place or mount EP202 at a position as high as possible and to face the source of the odor.
Always make sure there is air flow in the surrounding environment to prevent the built up of ozone, although ozone will be converted back to oxygen in about 30 minutes after it is generated. 

Notes:

Always keep the unit clean with a dry cloth.
Use alkaline batteries because the unit requires even discharge characteristics. Do not use an unregulated power adaptor, especially one with higher rating than 6V D.C 100mA. Use only the power adaptor supplied.
Do not place EP202 ozone output grill near any metal object as ozone will oxidize any metal in its path.
Do not attempt to repair the unit, because there are no serviceable parts inside.
Do not use in wet environments.