Quiet Lightweight Negative Ionizer Air Purifier For Neutralize Microscopic Contaminants

The product:

The EP202 ozone and negative ion air cleaner is compact in size, technologically advanced, and can simultaneously eliminate odor and purify air. It is suitable for use in places such as the living room, bed room, garage, etc.

Ozone is a very powerful oxidizing gas which oxidizes long chain molecules that can be smelt by the nose. When oxidized, these long chain molecules break down into shorter molecules that cannot be smelt, thus removing the odor from the air.

Negative ions are considered the “vitamin of the air”. Molecules usually carry a neutral charge; however, when molecules lose an electron, they become anions (negatively charged ions). Anions are relatively unstable, and will attract and trap any free electron pairs. As a result of this attraction, small air pollutants and dust molecules bind with anions, producing an air purifying effect.

EP202 has dual output of ozone and negative ions. It generates a sine wave high voltage, which is applied to two stainless steel pins thus releases negative ions. These negative ions are relatively free from harmful NOx molecules, unlike the ions produced from using high voltage pulses. Because of the simple waveform used, the device gives minimal interference to nearby electrical appliances. In addition, the powerful ozone generated by twin neon is released by an internal fan, resulting in the effective dispersion of deodorizing ozone over a broader area. This enables ozone de-odor ability being effective over a wider area. The amount of zone generated by EP202 is well below the international health safety standard of 0.08ppm over 8 hours. 

Specifications:

• High output of negative ions at above -6kV
• Stainless steel pin electrodes 
• Flashing neon to indicate output pulses and battery status
• Ultrasonic frequency waves at about 30kHz
• High ozone output using twin ozone generating tubes, <0.08 ppm over 8 hours
• Effective area 15-20(150-200 ft sq.)
• Brushless long live D.C fan to blow ozone out of casing
• Power consumption: <300mA at 6V D.C
• Dimension: 76× 63×83mm(3” ×2 1/2” × 3 1/4”)

Features:

1. Adopting the advanced ionic breeze technology, to neutralize microscopic contaminants and allergens in the air, such as dust, pollen, fungal spores, etc, which is ideal for home and office.
2. Auto ozone timer, humanized design, which cleans thoroughly the interior air, reduces the risk of diseases, and eliminates odors.
3. The highly efficient ceramic ozonizer assures stable ozone output and long shelf-life.
4. The high quality anion module guarantees continuous ionization working.
5. Being cordless compact design and low power consumption.

Benefits:

        Double purifying power :ozone and ionic purification

 Compact design

 Relieves allergies, hay fever, sinusitis migraines, bronchial asthma and other respiratory conditions

 Deodorizes 

 Limits molds, bacteria,viruses, fungi, spores, suspended particles, odors, yeast and protozoa .

 Increases energy,libido,well-being 

 Improves mood and relives winter depression 

The package:

There are five items in the box:

• The EP202 unit
• The mounting bracket with screws
• 4×AA alkaline batteries
• AC/DC adaptor or switching mode power adaptor
• The instruction manual

Operation:

Gently press the ON/OFF button once to switch ON the unit, as will be indicated by the flashing neon LED and the feeling of static wind at the output holes at the top. Do not press the ON/OFF switch for too long as it may then turn the unit OFF. To turn it OFF, hold the button for about 2 seconds.
A set of batteries should provide 5 hours of use. When the speed of the flashing neon becomes very slow, the batteries should be replaced.
Due to the fact that ozone is about 1.7 time heavier than air, it is recommended to place or mount EP202 at a position as high as possible and to face the source of the odor.
Always make sure there is air flow in the surrounding environment to prevent the built up of ozone, although ozone will be converted back to oxygen in about 30 minutes after it is generated.

Notes: 

Always keep the unit clean with a dry cloth.
Use alkaline batteries because the unit requires even discharge characteristics. Do not use an unregulated power adaptor, especially one with higher rating than 6V D.C 100mA. Use only the power adaptor supplied.
Do not place EP202 ozone output grill near any metal object as ozone will oxidize any metal in its path. 
Do not attempt to repair the unit, because there are no serviceable parts inside.
Do not use in wet environments.