Kitchen Germicidal Ionic / Ozone Dual Air Purifier 30Khz Ultrasonic Frequency Waves

Specification details :

The package:

There are five items in the box:

1. The EP202 unit
2. The mounting bracket with screws
3. 4×AA alkaline batteries
4. AC/DC adaptor or switching mode power adaptor
5. The instruction manual

Functions:

1. Remove Smoke, odors, pollen, dust, allergen,etc.
2. Kill bacteria, viruses, fungi, spores, mites, etc.
3. Increase the negative ions in the air, giving you a fresh breath like wolking in the woods or near a waterfall
4. Increase oxygen in the room, helping people with respiratory diseases.
5. Enhance the immune system
6. Increase work productivity and concentration.

Features:

1. Adopting the advanced ionic breeze technology, to neutralize microscopic contaminants and allergens in the air, such as dust, pollen, fungal spores, etc, which is ideal for home and office.
2. Auto ozone timer, humanized design, which cleans thoroughly the interior air, reduces the risk of diseases, and eliminates odors.
3. The highly efficient ceramic ozonizer assures stable ozone output and long shelf-life.
4. The high quality anion module guarantees continuous ionization working.
5. Being cordless compact design and low power consumption.

Installation:

1. Push the battery cover downwards to open. Install four alkaline AA batteries into the battery compartment. (The terminal with a spring is the negative terminal.) Replace the battery cover.
2. For continual indoor use, use the power adaptor supplied:
a. Use the two screws provided to fit the mounting bracket onto the back of the unit
b. Insert the round shaped outlet of the power adaptor into the only socket at the back of the unit, and plug the other end to an appropriate electrical socket on the wall.
3. Place the unit at a convenient position so that the negative ions and ozone will be most effectively dispersed throughout the room.

Operation:

Gently press the ON/OFF button once to switch ON the unit, as will be indicated by the flashing neon LED and the feeling of static wind at the output holes at the top. Do not press the ON/OFF switch for too long as it may then turn the unit OFF. To turn it OFF, hold the button for about 2 seconds.
A set of batteries should provide 5 hours of use. When the speed of the flashing neon becomes very slow, the batteries should be replaced.
Due to the fact that ozone is about 1.7 time heavier than air, it is recommended to place or mount EP202 at a position as high as possible and to face the source of the odor.
Always make sure there is air flow in the surrounding environment to prevent the built up of ozone, although ozone will be converted back to oxygen in about 30 minutes after it is generated. 

Specifications:

• High output of negative ions at above -6kV
• Stainless steel pin electrodes
• Flashing neon to indicate output pulses and battery status
• Ultrasonic frequency waves at about 30kHz
• High ozone output using twin ozone generating tubes, <0.08 ppm over 8 hours
• Effective area 10-15(100-150 ft sq.)
• Brushless long live D.C fan to blow ozone out of casing
• Power consumption: <300mA at 6V D.C
• Dimension: 76× 63×83mm(3” ×2 1/2” × 3 1/4”)

Notes:

Always keep the unit clean with a dry cloth.
Use alkaline batteries because the unit requires even discharge characteristics. Do not use an unregulated power adaptor, especially one with higher rating than 6V D.C 100mA. Use only the power adaptor supplied.
Do not place EP202 ozone output grill near any metal object as ozone will oxidize any metal in its path.
Do not attempt to repair the unit, because there are no serviceable parts inside.
Do not use in wet environments.